Product Detail
Steelmate Rolling Code Mutual-Duplicating Remote Controller 433MHZ for RD108X 5pcs/lot
Steelmate Rolling Code Mutual-Duplicating Remote Controller 433MHZ for RD108X 5pcs/lot
Steelmate Rolling Code Mutual-Duplicating Remote Controller 433MHZ for RD108X 5pcs/lot
Steelmate Rolling Code Mutual-Duplicating Remote Controller 433MHZ for RD108X 5pcs/lot
Steelmate Rolling Code Mutual-Duplicating Remote Controller 433MHZ for RD108X 5pcs/lot

Steelmate Rolling Code Mutual-Duplicating Remote Controller 433MHZ for RD108X 5pcs/lot

  • US$49.98 US$29.99 40%
  • Out of Stock
  • Quantity
Steelmate Rolling Code Mutual-Duplicating Remote Controller 433MHZ for RD108X 5pcs/lot
Specifications
  • Item No.
  • COBD23416
  • Weight
  • 100g
Description

Steelmate Rolling Code Mutual-Duplicating Remote Controller 433MHZ for RD108X 5pcs/lot
Function:

Suitable for remote control rolling code chip: HCS200 and HCS201, specially for mutual duplicating Steelmate Remote Control.
Configuration and Parameters:

Number of buttons: 3 buttons (lock button, unlock button, rear box button)
Battery:2016*2 Working Voltage: 6V
Parts: Pins, key blank
Frequency: 433MHZ
Dimensions: 35 × 71 × 21mm
Weight: 0.063kg

Operation guide for Mutual-Duplicating Remote Controller
1.Clear code:
It’s necessary to clear the original codes of the copy code remote control.
Press and hold the “unlock” button and “luck” button simultaneously for 2 seconds till the LED indicator flashes 3 times.
Keep pressing the “lock button” button and release the “unlock” button, then press the “unlock” button for 3 times within 5 seconds.
The LED indicator fast flashes 2 times to indicate the code clear is finished.
2.Copy code:
Firstly mutual duplicating “luck” button, then “unlock” button.
3.Retrieve Code:
In case if you lost the codes you are using by accident, don’t worry you can retrieve them by following the step below:
firstly mutual duplicating “unlock” button, then match key in the car.

Package including:

5 X Steelmate Rolling Code Mutual-Duplicating Remote Controller 433MHZ for RD108X

Reviews 0
Write a Review
  • * Rating
    * Gender
    * Your Name
    * Your E-Mail
    * Review Detail

Previous: Xhorse VVDI2 Key Programmer V7.0.1 with ID48 96Bit Copy & VAG MQB Immobilizer

Next: ELS27 FORScan Scanner with FT232RL Chips for Ford/Mazda/Lincoln and Mercury Vehicles